Yucheng Shen
- 合計アクティビティ 26
- 前回のアクティビティ
- メンバー登録日
- フォロー中 0ユーザー
- フォロワー 0ユーザー
- 投票 0
- サブスクリプション 6
コメント
Yucheng Shenによる最近のアクティビティ 最近のアクティビティで並べ替え-
@xu tongI think there are two ways to solve your problem:1.Add GCPs to your project2.Manually correct the altitude with 'Image Properties Editor'
-
@Philipp Pix4D added 'Double Grid Mission' on iOS version of Capture. Check here: (iOS) Pix4Dcapture Release 1.3https://support.pix4d.com/hc/en-us/articles/211252483(Android and iOS) Which type of ...
-
Not sure about accuracy. Check this post: https://support.pix4d.com/hc/en-us/community/posts/206188366-DJI-FW-update-1-07-0060-changes-EXIF-altitude-data-again-
-
You can use 'DJI GO – Intelligent Flight Mode' as walk around.
-
@Thomas Yes. I installed them on different cellphones to save time & trouble. I get used to calibrate the compass in every new flight location. Since the root cause remains unclear, I tend to short...
-
@John Met similar situation before. Try this:1.Switch off your drone and RC, wait 10 seconds.2.Restart your cellphone at the same time.3.Switch on your RC, then drone.4.Connect cellphone to RC.5.St...
-
For now, total area of a single grid mission is limited by transmission distance between RC and drone.
-
My configuration:-P3A (v1.4.0010)-Pix4D Capture 2.0.5 on Android 4.3.1-DJI Go on on Android 5.0@MikeIf I had to conduct a survey in cold weather, I would put the battery in my pocket to keep it warm.
-
@ManolisTry this:1.Ensure DJI Go app is stopped and you are in 'P' mode.2.Start Capture app and define your grid mission.3.Start your UAV and let it hover (still in 'P' mode).4.Click 'Start' button...
-
@Javier Format your SD card with DJI Go and try again.