Erik Graham
Pacific Community Design Portland, Oregon Aerial Survey::imaging::Construction Support DJI Inspire2
- Total activity 49
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 5
- Subscriptions 15
Activity overview
Latest activity by Erik Graham-
Erik Graham commented,
It also seems like your front overlap is really inconsistent. I'm guessing your memory card isn't fast enough to process pics a the speed you're flying/shooting.
-
Erik Graham commented,
After looking at your images, i'm guessing there isn't enough contrast/clarity for Pix4d to match pixels with, combined with slight motion of the sea grass, and changing light pasterns from the wat...
-
Erik Graham commented,
From the app updates, it appears that there must be a large percentage of Parrot users that need all the attention from the developers.
-
Erik Graham commented,
Yes sir. or you can leave it in A mode in case you need to move quicker to avoid something.
-
Erik Graham commented,
Just adding my voice to the request for iOs resume mission capabilities. Please!
-
Erik Graham commented,
Hey Cesar, I've been in similar situations with hawks and eagles and have taken manual control to land the UAV until they leave. 1. If you take manual control, the mission you will not be able to r...
-
Erik Graham commented,
Hi Manish, It looks like you don't have enough front overlap. Are you flying the road corridor manually with the drone set to take pictures every "X" meters? You would likely either need to fly hig...
-
Erik Graham commented,
I don't know why this happens, but my work around has been to utilize the GCP/MTP Manager - Basic Editor to assign 2 points to each GCP. I then use the GCP/MTP Manager - rayCloud editor to refine t...
-
Erik Graham commented,
Timber Project - 1680 Seconds CPU - Dual Intel Xeon E5-2630 @2.3GHZ (2 sockets, 12 cores = 24 logical processors)CPU Cooler - UnknownGPU - Nvidia GeForce GTX 1070RAM Amount - 32 GB (16x2gb) RAM S...
-
Erik Graham commented,
For the Timber Project, do you load all of the MSP and RGB images, or just one or the other?