Yuka (Pix4D)

1. PIX4Dreact
2. License
3. Trial, sign up and login - PIX4Dreact

I deactivated a device using the license. Would you please try it again? 

• View comment
• Yuka (Pix4D)
• Created October 04, 2021 05:02
• 0 votes

1. PIX4Dmapper
2. How to... (step-by-step instructions)
3. How to automatically generate a Digital Terrain Model (DTM)

Hello Marie, It is an interesting topic! Regarding the classification, you can follow the steps described in How to generate the point cloud classification and generate it. If the results need to b...

• View comment
• Yuka (Pix4D)
• Created March 23, 2021 06:04
• 0 votes

1. PIX4Dmapper
2. How to... (step-by-step instructions)
3. How to import a volume into Volumes

Hello Sam, If I understood your question correctly, you can import a shapefile that has the same coordinate system and check the coordinates of points by looking at the right bottom of the Pix4Dmap...

• View comment
• Yuka (Pix4D)
• Created March 19, 2021 07:36
• 0 votes

1. PIX4Dmapper
2. Installation and login
3. How to log in to PIX4Dmapper

Would you please contact us from here with the license key or the email address associated with the license? You can also contact us from  Personal Support. Kind regards,    

• View comment
• Yuka (Pix4D)
• Edited March 15, 2021 04:30
• 0 votes

1. PIX4Dcapture
2. General / FAQ / Release Notes
3. What is maximum distance to the flight? - PIX4Dcapture

Hello, The drone would normally continue the mission; however, it also depends on how you have configured their drone. In DJI Go, If you have configured their drone to RTH on signal loss, then that...

• View comment
• Yuka (Pix4D)
• Edited March 11, 2021 14:02
• 0 votes

1. PIX4Dmapper
2. Installation and login
3. Pix4Ddiscovery / Discovery mode

Pix4Ddiscovery is a free product and does not have a time limit. The user can open and see processed projects only for step 1 and step 2 (Pix4Ddiscovery does not give access to step 3). For more in...

• View comment
• Yuka (Pix4D)
• Created March 10, 2021 05:07
• 0 votes

1. PIX4Dmapper
2. How to... (step-by-step instructions)
3. How to edit the point cloud in the rayCloud

Hello Rohit, You can edit the point cloud, save the project and run again step 3 to improve the DTM. Please note that only the ground and road surface groups are used for the DTM generation.  Kind ...

• View comment
• Yuka (Pix4D)
• Created March 02, 2021 01:41
• 0 votes

1. PIX4Dmapper
2. Manual
3. Select Image / GCP / Output Coordinate System

Pix4Dmapper cannot work with custom geoids. Currently, Pix4Dmapper lets you choose from the geoids EGM 84, EGM 96 and EGM 2008. Converting the images' coordinates or the GCPs' coordinates to other ...

• View comment
• Yuka (Pix4D)
• Created February 24, 2021 03:04
• 0 votes

1. PIX4Dcloud
2. How to... (step-by-step instructions)
3. How to upload or replace results to PIX4Dcloud

Hello Stefan, This error is expected for outputs having a significant size and/or a complex geometry. In this case, the tiling process failed, meaning that the generated 2D output could not be spli...

• View comment
• Yuka (Pix4D)
• Created February 19, 2021 09:38
• 0 votes

1. PIX4Dmapper
2. How to... (step-by-step instructions)
3. How to import a Point Cloud delivered by an External Source into PIX4Dmapper for processing

Hello Christian, Thank you for the explanation. Would you please try it with the other software such as CloudCompare to see if the same issue would occur?  Warm regards,

• View comment
• Yuka (Pix4D)
• Created February 16, 2021 12:55
• 0 votes