NV CTG
- Total activity 63
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 8
- Subscriptions 23
Activity overview
Latest activity by NV CTG-
NV CTG commented,
Jorg, just use the DJI GO app and put the camera in timed shot mode for 2s, 3s, or whatever you want the interval to be.
-
NV CTG commented,
I am trying to model a bridge. I took a series of drone shots which are georeferenced and I built a model from that. I also took non-georeferenced ground shots from a Sony camera and built a model ...
-
NV CTG commented,
I've attached a document for terrain awareness I received directly from DJI support. https://drive.google.com/file/d/1upn3aB-lER5_V28gFRfQjXIM22BU6d7b/view?usp=sharing I have tried several times f...
-
NV CTG commented,
How can we select the output coordinate system to be an un-projected WGS84? I do not want the UTM projection. I want the exact same Output that is shown on the Input (see picture). I need this beca...
-
NV CTG commented,
I agree with Hunter. The original imagery would be super helpful. We have to process on desktop because there is usually a lot of clean up we have to do with the Point Cloud and Ortho which is not ...
-
NV CTG commented,
Troy, I would recommend you put the 3D Mesh in the cloud if your point cloud is that big. You're not going to see favorable results as even small point clouds take a while to render when moving aro...
-
NV CTG commented,
You're not seeing any issues within Pix4D because everything is fine, looks good, and checks out within the Pix4D platform. However when you export the ortho or other product to another GIS applica...
-
NV CTG commented,
It is crucial for US projects with localized coordinate systems to be able to use US Survey Foot in the Arbitrary coordinate system. Our projects are very difficult when utilizing PPK workflows and...
-
NV CTG created a post,
Insert annotations utilizing coordinate input
It would be helpful to be able to insert annotations at an exact location on site. Right now you have to click on the site to place the marker. It then displays the coordinates of your marker. This...
-
NV CTG created a post,
Copy annotations from one data set to another - Pix4D Cloud
A lot of times we create annotations for static points on the site and it would be extremely helpful to be able to copy these annotations to another data set (flight of the same site but a differen...