Important: PIX4Dmapper, PIX4Dcloud, PIX4Dmatic, PIX4Dreact, and PIX4Dfields can process images taken from practically any image acquisition app even if PIX4Dcapture Pro, PIX4Dscan or PIX4Dcapture don't support the drone. For more information, see which image acquisition app can I use with Pix4D's software?
To consult drones and cameras supported by all Pix4D's software, please visit Supported drones and cameras.
PIX4Dcapture Pro is compatible with iOS and Android tablets, mobile devices, and different DJI and Parrot controllers with built-in screens. The PIX4Dcapture Pro app requires iOS 13 / Android 7 or later. We recommend using the latest operating system.
PIX4Dcapture Pro has been tested with the following devices:
- iOS: iPad Mini 5th gen, iPad Pro 2nd gen, iPad 7th gen, iPad Air 2, iPhone 13 Pro Max.
- Android:
- Tablet: Samsung Galaxy Tab A7, Samsung Galaxy Tab S7, Samsung Tab Es 15, Xiaomi Redmi Note 9, Lenovo Tab M10 Fhd Plus.
- DJI Smart Controller Enterprise, DJI RC Pro Enterprise.
PIX4Dcapture Pro is compatible with the following drones, cameras, and controllers:
Manufacturer
Drone
Camera
Controller
iOS
Android
DJI drones
Mavic 3E (*1)
Built-in
Default DJI RC Pro Enterprise
-
Mavic 3T (*1)
Built-in (RGB)
Default DJI RC Pro Enterprise
-
Mavic 3M (*1)
Built-in
Default DJI RC Pro Enterprise
-
Mini 3 (*6)
Built-in
DJI RC N1 + Android device
-
Mini 3 Pro (*6)
Built-in
DJI RC N1 + Android device or DJI RC Pro
-
Matrice 300 RTK (*1)
DJI Zenmuse P1 (*4)
Default DJI Smart Controller Enterprise (*5)
Phantom 4 Pro V2.0
Built-in
Default GL300L
Phantom 4 Pro
Built-in
Default GL300F
Mavic 2 Pro
Built-in
Default RC1A
Mavic 2 Zoom
Built-in
Default RC1A
Phantom 4 RTK (*1)
Built-in
GL300L (SDK remote controller)
Phantom 4
Built-in
Default GL300C
Matrice 210 RTK V2
DJI Zenmuse X4S/X5S (*3)
Default GL900A (Cendence)
Matrice 210 V2
DJI Zenmuse X4S/X5S (*3)
Default GL900A (Cendence)
Matrice 200 V2
DJI Zenmuse X4S/X5S (*3)
Default GL900A (Cendence)
Matrice 210 RTK (*2)
DJI Zenmuse X4S/X5S (*3)
Default GL800A (Cendence)
Matrice 210 (*2)
DJI Zenmuse X4S/X5S (*3)
Default GL800A (Cendence)
Matrice 200 (*2)
DJI Zenmuse X4S/X5S (*3)
Default GL6D10A
Parrot drones
Anafi Ai
Built-in
Default Skycontroller 4
-
Anafi USA
Built-in (RGB only)
Default Skycontroller 3, Skycontroller USA
(*7),and Skycontroller 4 black
Anafi Thermal
Built-in (RGB only)
Default Skycontroller 3
Anafi
Built-in
Default Skycontroller 3
*1 - Network RTK corrections available.
*2 - Cell tower and transmission tower assets not available.
*3 - Compatible lens model for DJI Zenmuse X5S is DJI MFT 15mm/1.7 ASPH.
*4 - Compatible lens model is DJI DL 35mm F2.8 LS ASPH.
*5 - PIX4Dcapture Pro can be installed on an external iOS or Android mobile device (phone or tablet) mounted over the Smart Controller Enterprise (screen mounting bracket and appropriate USB cable required) or on the DJI Smart Controller Enterprise built-in screen (More info here: How to install the App on Remote Controllers with screens? (APK) - PIX4Dcapture Pro).
*6 - The DJI Mini 3 and DJI Mini 3 Pro only support Grid Mission (Generic) inside the PIX4Dcapture Pro app. These drones don't support the Terrain Awareness feature either.
*7 - Compatible with Skycontroller USA above or equal to revision AD only.
Disclaimer: Pix4D publishes this information as a courtesy to its customers. Because this information may not be accurate, Pix4D makes no warranty of any kind, expressed or implied, with respect to its validity.
Note: Drones that are compatible only using the provided APK (DJI Mavic 3E, DJI Mavic 3T, DJI Mavic 3M, DJI Mini 3, DJI Mini 3 Pro) cannot be selected from the app downloaded from the Apple App Store or Google Play Store, the drone won't appear in the list.
Please install the APK following the links in the table above or by visiting this page: How to install the app on Remote Controllers with Screens? (APK) - PIX4Dcapture Pro. The drone will then appear in PIX4Dcapture Pro when opened from the APK.