Antenna recognition failure - PIX4Dinspect

Follow

The artificial intelligence (AI) automatic antenna recognition algorithm can fail under one of the following conditions.

  • The 3D Model was generated but badly reconstructed and antennas could not be detected.
  • There are no antennas in the cell tower or at least no antennas of the recognizable types.
  • There is no cell tower.

Under these conditions, the AI algorithm can fail to identify antennas.

There is no way to re-run the Automatic antenna recognition step only. In case of failure, the root cause must be addressed and eliminated and the inspection project recreated and reprocessed.

Was this article helpful?
2 out of 2 found this helpful

Article feedback (for troubleshooting, post here instead)

0 comments

Article is closed for comments.