How to use the picture of the calibration target taken with Sequoia/MultiSpec 4C

Starting from version 2.2 of Pix4Dmapper, the picture of the Airinov radiometric calibration target is automatically recognized by Pix4Dmapper. The target region and appropriate albedo values are saved in the project and can be reviewed in the Processing Options: 203891879.

To calibrate the project with a picture of the calibration target taken either immediately before or after the flight, one should simply import this image in the project during project creation: 202557319.

With the Sequoia camera, it is necessary to have firmware version 1.1 or later and to use the Calibrate button for Sequoia (either by connecting to Sequoia via wifi or through the eMotion software for senseFly drones) to use this feature. 

Was this article helpful?
0 out of 1 found this helpful